Logged Out Ip Station - Call Destination - NEC UNIVERGE SV7000 User Manual

Dterm series i / dterm ip
Hide thumbs Also See for UNIVERGE SV7000:
Table of Contents

Advertisement

To cancel
Press Speaker. Receive dial tone. If cancelling for another station, press
MULTILINE APPEARANCE.
Press FWD-NA or dial "Call Forwarding – Don't Answer" cancel code.
Receive service set tone. LED goes out at your station (or the D
multiline station).
Press Speaker. Call Forwarding – Don't Answer is cancelled.
Logged Out IP Station – Call Destination
To set
Lift handset or press Speaker key.
Press the FDL Key or dial "Logged Out IP Station – Call Destination" access code.
Dial destination station number; receive service set tone.
Replace handset or press Speaker key.
Logged Out IP Station – Call Destination is set.
Using the Soft Key
Press FDL Soft Key; receive special Dial Tone.
Dial destination station number.
Receive service set tone; "FORWARD SET" is displayed.
term
To verify (with D
4D/8D/16D/16LD/32D)
Press "Logged Out IP Station – Call Destination" feature key lit red or press
FDL.
Display indicates the station number calls are forwarded.
Note: With Soft Key Operation, FDL flashes on the display.
term
of the
– 55 –
FORWARD CANCEL
4:26 PM
TUE 13 APR 2004
FORWARD SET
4:26 PM
TUE 13 APR 2004
FORWARD SET
4:26 PM
TUE 13 APR 2004
MIC
FORWARD
4:26 PM
TUE 13 APR 2004
XXXX
XXXX
>>>
XXXX

Advertisement

Table of Contents
loading

Table of Contents