Table of Contents
Advertisement
(2) External Ports
The SFP ports enable the FC Switch Module to connect with fibre channel devices.
The FC Switch Module is equipped with eight SFP ports. However, available ports vary depending
on the type. See the table below for the available ports.
Port
Port 17
Port 18
Port 19
Port 20
Port 21
Port 22
Port 23
Port 0
(3) Internal Ports
The internal ports allow the FC Switch Module to connect to fibre channel controllers inserted to
Mezzanine slots on the CPU blades in a Blade Enclosure (SIGMABLADE).
The FC Switch Module is equipped with 16 internal ports. However, available ports vary depending
on the type. See the table below for the available ports.
Port
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Port 7
Port 8
Port 9
Port 10
Port 11
Port 12
Port 13
Port 14
Port 15
Port 16
Available/unavailable
N8406-019
√
√
√
√
–
–
–
–
An SFP module can be installed on an unavailable SFP slot. However, the
SFP module cannot connect the FC Switch Module with a fibre channel
device.
Available/unavailable
N8406-019
N8406-020
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
–
√
–
√
–
√
–
√
–
√
–
√
–
√
–
The slot number of the CPU blade to which a specific internal port is
connected is fixed. Changing the number is not allowed. For details, refer to
the User's Guide of the Blade Enclosure (SIGMABLADE) you use.
N8406-020
√
√
√
√
√
√
√
√
Connected CPU blade
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Slot 9
Slot 10
Slot 11
Slot 12
Slot 13
Slot 14
Slot 15
Slot 16
- 44 -
Advertisement
Table of Contents
