NEC SIGMABLADE N8406-019 User Manual page 43

4.
Port status LED (located to the left of each port number)
LED status
OFF
Illuminating in green
Blinking in green
(irregular blinking)
Illuminating in umber
Blinking in umber slowly
(1-sec interval)
Blinking in umber fast
(0.25-sec interval)
Blinking in umber and green
alternately
5.
Port speed LED (located to the right of each port number)
LED status
Illuminating in green
Illuminating in umber
No signals are sent to the SFP module, a proper cable is not
connected to the SFP module or a fibre channel device is not
connected to the SFP module.
No traffics flow in the online status (with a device connected).
The port is in the online status and traffics flow through the port.
The port receives optical signals but does not enter into the
online status yet.
As a result of self-diagnosis, a malfunction is found in the port
and the port is in the disable status. *
The port is in the fault status. *
The port is in the bypass mode. *
A device error occurs in each status with asterisk mark (*) in the table
above. Contact your service representative.
OFF
The FC Switch Module does not support the connection of a device with port
data rate 1Gbps yet.
Description
Description
1G bps mode
2G bps mode
4G bps mode
- 43 -