NEC MH4500 User Manual page 36

3. While pressing down on the small outer bar safety latch (4 on the following
figure), pull the small outer bar out of the assembly and set aside for
installation on the chassis.
T
Release the safety latch on the center bar (5 on the figure) and collapse
the large outer bar and center bar together.
T
Set the assembly aside for later installation in the rack.
2-16 Setting Up Your System
4
1 2
5
1.
Large Outer Bar
2. Center Bar
3. Small Outer Bar
4. Safety Latch on Small Outer Bar
5.
Safety Latch on Center Bar
Releasing the Small Outer Bar
3