Server Menu - NEC MH4500 User Manual

Nec server user's guide
Table of Contents

Advertisement

Feature
Floppy Write Protect

Server Menu

The following table lists the settings for the Server Menu.
Feature
System Management
Console Redirection
Processor Retest
EMP Password Switch
EMP ESC Sequence
EMP Hangup Line
String
Modem Init String
High Modem Init String
EMP Access Mode
EMP Restricted Mode
Access
EMP Direct
Connect/Modem Mode
3-12 Configuring Your System
Security Menu
Choice
Description
be enabled unless at least one
password is enabled.
Disabled
When secure mode is activated,
Enabled
diskette drive is write protected.
User must enter password to
disable. Cannot be enabled unless
at least one password is enabled.
Server Menu
Choices
Description
Press Enter
Refer to "System Management
Submenu."
Press Enter
Refer to "Console Redirection
Submenu."
Yes
Select Yes to have BIOS clear all
No
processor status and retest the
processor(s) on boot-up.
Disabled
Enables or disables EMP
Enabled
password.
+++
Escape string for the modem on
User
EMP port. This field accepts up to 4
characters.
ATH
Hangup string for the modem on
User
EMP port. This field accepts up to 8
characters.
AT&FS0=1S14=0&
This string accepts up to 20
D0
characters to set up the modem.
Characters above 16 are entered
here.
Pre-Boot Only
Pre-Boot: EMP enabled during
Always Active
power down or POST.
Disabled
Always Active: EMP always
enabled.
Disabled: EMP disabled.
Disabled
Power down, front panel NMI,
Enabled
Reset Control via EMP can be
disabled/disabled.
Direct Connect
Connect directly to POST or use a
Modem Mode
modem.
Your Setting
Your Setting

Advertisement

Table of Contents
loading

Table of Contents