Equipment Log - NEC MH4500 User Manual

Equipment Log

Use this equipment log form to record pertinent information about your system.
You will need some of this information to run the System Setup Utility. Be sure
to update the equipment log when you add options.
Record the model and serial numbers of the system components, dates of
component removal or replacement, and the name of the vendor from whom the
component was purchased. Be sure to record the same information for any
components added to the system, such as hard disk drives, add-in boards, or
printers.
Record the model and serial numbers of the unit and system baseboard. The
model and serial numbers of the system unit are recorded on a label attached to
the rear of the unit. The serial number of the system board is located along the
left side of the board, near the PCI expansion slot covers.
The location of serial numbers on add-in boards, hard disk drives, and external
equipment, such as video displays or printers, varies from one manufacturer to
another. Literature accompanying these products should illustrate or describe the
location of model and serial numbers.
Equipment Log 1