Changing The Adapter And Device Configurations - NEC MH4500 User Manual

.
Adapter Port No
SYM53C810 2000
SYM53C896 3000
SYM53C896 3400
Change Adapter Status – Press ENTER to change adapter Next Boot Status.
Adapter Boot Order – Press ENTER to select and change boot order of each SCSI adapter.
Additional Adapter Configuration – Not used.
Display Mode-Verbose – Press ENTER to change display mode.
Mono/Color – Press ENTER to change display from black/white to color.
Language
Help
Quit
*Next Boot Status for this controller must be turned OFF if you install the optional Mylex AcceleRAID 250 Controller board in
your system. Refer to "Change Adapter Status" above.
The following keys are active for all SCSI Configuration screens:
Key
Arrows
Enter
Esc

Changing the Adapter and Device Configurations

The SCSI Configuration Utility Main Menu lists the onboard SCSI adapters and
shows their current settings. The adapters control the operation of the SCSI
devices in your system (hard disk drives or removable media devices).
1. Highlight an adapter and press
2. Select "Adapter Setup" and press
Symbios SCSI Utility Main Menu
IRQ Level Current
11 On
11 On
11 On
Active Keys
Action
Up and down arrows move from one parameter to another
within a screen.
Displays options for a configurable parameter. Selects an
option.
Moves back to previous screen or parameter or EXIT if at
the Main menu.
Enter
Enter
Status
Next Boot
On
On*
On
.
. The Adapter Setup screen displays.
Configuring Your System 3-17
NVRAM Found
Yes
Yes
Yes