Appendix
Log in IP camera via IE, turn to Network Settings and check Enable DHCP.
After setting all the parameters, click save and restart to make the parameters valid.
Internet
You have three ways to connect IP camera to Internet:
•
Fixed IP mode
•
Broadband and router sharing Internet access mode (dynamic obtainment of
extranet IP address mode) like ADSL and so on.
•
PPPoE dial-up access.
After IP camera is connected to Internet, remote Internet users can visit it directly via domain
name or IP address.
Fixed IP mode
See below picture for the network topology:
Please refer to below picture for the network settings:
50