System - Honeywell HISD-1181W Operation Manual

•
Preset Tour: You can set two preset tours, each of them can include 8 presets,
and can set stay time for each preset.
•
Time set: On-off: Enable or disable the time set.
Task: Set the tasks that you want the dome to do.
Start/Close: Set the start and close time.
•
Dome Camera PTZ default setting: PTZ parameters will be recovered as factory
setting values
After setting all the parameters, click Save to make the parameters valid.

System

System Info
See Figure 3-43 for the interface of "System Info":
System Info: Display information like Device Name, Device ID and Version. User can
define the device name.
After setting all the parameters, click Save to make the parameters valid.
System Time
The priority of task that set in Time set is higher than that of
Park. For example, the demo is doing the task that set in Park
when enable task in Time set, it will stop and turn to the latter.
•
The time cannot overlap between the five tasks.
•
The priority of operating manually is higher than tasks that
set in Time set. For example, the demo is doing the task
that set in Park while the PTZ is operated manually, then it
will stop and turn to the latter. When you stop to control the
PTZ, the former will be recovered automatically after 30s.
Figure 3-43
Honeywell
39