Honeywell HISD-1181W Operation Manual page 25

•
DHCP: If DHCP function of the router is enabled, IP camera will automatically
fetch IP address from the router.
•
IP address: Set the camera's IP address.
•
Subnet mask: Default value is 255.255.255.0 (users are recommended not to
change it).
•
Gateway: Set the gateway IP of IP camera, for example when the device is
connected to public network via a router, the gateway IP is the router IP.
•
MAC: The Physical address of IP camera (users are recommended not to change
it).
•
DNS: The default DNS address is the DNS address of Guangdong province, users
outside the area please use DDNS function to set the DNS address as their local
DNS address.
PPPOE
See Figure 3-24 for the interface of "PPPOE setting":
Figure 3-23
After revise and save parameters, the device will restart. If it is
applied in LAN, please pay attention to avoid conflict between its
IP address and the IP addresses of other devices or PC in the
LAN.
Honeywell
19