Operating Guide for IP Camera
Snap picture parameter setting: Supports only images of JPG format currently, megapixel
camera definition is the same as set in video definition, other cameras can choose different
pixel by yourself.
After you set these parameters, please click Save to make them valid.
Network Settings
Basic
See Figure 3-22 for the interface of "Basic setting":
•
Data port: Default value is 5000 (users are recommended not to change it).
•
Web port: Default value is 80 (users are recommended not to change it).
After you set these parameters, please click Save and the device will reboot to make the
parameters valid.
LAN
See Figure 3-23 for the interface of "LAN setting":
18
Figure 3-21
HISD-1181W
Figure 3-22