Record Setting - Honeywell HISD-1181W Operation Manual

Operating Guide for IP Camera

Record Setting

See Figure 3-34 for the interface of "Record Setting":
•
Record Schedule: Set the period of scheduled recording, two periods allowed.
•
File save mode: Set the save scheduled recorded files to FTP server via FTP
uploading, FTP server can be set up in FTP settings.
After setting all the parameters, click Save to make them valid.
Snap Setting
See Figure 3-35 for the interface of "Snap setting":
28
•
Hot-plugging is not recommended for SD card, compulsory
hot-plugging may damage the SD card, causing data loss or
abnormal operation.
•
Do not cut off the power of the device during formatting
process.
•
Ext2 file is used to format system by default.
•
IP Camera doesn't support the storage that can be
formatted into several partitions, so if you want to format it
on PC before using it, please format it into one partition.
Figure 3-34
Record files are saved via FTP uploading. SD card is needed for
cache memory support, otherwise record files will be overwritten
by new files due to insufficient cache memory space.
.