Honeywell HISD-1181W Operation Manual page 57

Setup steps:
1. Log in IP camera via crossover cable direct connection.(For details, please refer to
"Hardware Installation")
2. Switch to the page network settings, fill in the device IP address requested from
network service provider in to Basic Parameters, e.g. 218.84.31.168;
3. enter correct subnet mask, e.g. 255.255.255.192;
4. enter correct gateway, e.g. 218.84.31.131;
After setup completes, click Save and restart the device, then connect it to public network so
that all Internet users can visit the IP camera remotely via entering
browser.
Broadband and router sharing Internet access mode (dynamic obtainment of extranet IP
address mode) like ADSL and so on.
For dial-up access with router, see below picture for the network topology:
Users can set up DDNS domain name service at the same time. Fills the username and
password which were applied in the DDNS server into the DDNS setting item, implement
port mapping from the router. The router determines and points to the IP camera that need
to be visited according to different ports, long-distance Internet user can visit the IP camera
on the network via domain name directly.
Honeywell
http://218.84.31.168 to IE
51