Remote Config; Audio - Honeywell HISD-1181W Operation Manual

•
Code stream: set video stream for PC live preview, preferred stream and
alternate stream are selectable. The parameters of preferred and alternate stream
can be set up in "Video Settings".
•
Preview mode: users can choose Real time priority or Fluency priority mode
according to their needs.
•
Reset Mosaic: select this option to make image quality better, but CPU usage rate
will be higher at the same time.
PC storage Parameter
•
Record file packing time: set packing time of record files for local PC when it is
recording.
•
Record file path: set the storage directory for local records and snapped files.
The default path is C:\XDNVS.
After you set these parameters, please click Save to make them valid.

Remote config

Audio

See Figure 3-15 for the interface of "Audio setting".
•
Enable audio: turn on or turn off the audio of IP camera, When there is no need
for audio, close audio input to save DSP resource and network resource. Audio is
disabled by default.
•
Input type: You can choose MIC or Line In input.
•
Type: Support three types of audio compressed format:G.726,G.711A,G.711U.
•
Sampling: HISD-1181W supports audio sample rates of 8k and 32; HISD-2201W
supports 8k, 16k and 32k.
Figure 3-15
Honeywell
13