Honeywell HISD-1181W Operation Manual page 58

Appendix
Please refer to below picture for the network settings:
DDNS setup steps:
1. Log in DNNS server (e.g.http://www.mvddns.net), register user account and
password.(For details, please refer to Appendix 3)
2. Click to open DDNS;
3. Select DDNS service provider, e.g. mvddns.net;
4. Fill in the registration name to log into DDNS server;
5. Fill in the registration password to log into DDNS server;
6. fill in the domain name applied on DDNS server, e.g. test.mvddns.net;
7. Fill in DDNS server address, e.g.www.mvddns.net;
8. fill in the port of DDNS server, default value is 30000 (users are recommended not
to change it);
9. If several IP cameras are connected to one router, different web ports need to be
specified for each device, and port mapping needs to be done for every specified
port;
10. fill in the port number of public network web after mapping, the default port is 80.If
several IP cameras are connected to one router, different web ports need to be
specified for each device, and port mapping needs to be done for every specified
port.
After setting all the parameters, click save and restart to make the parameters valid.
Port mapping setup steps:
52