Honeywell HISD-1181W Operation Manual page 47

General user authority:
•
Can perform operations like snapping, recording, playback, talkback, monitoring,
alarm clearing, log searching, zooming and full-screen reviewing.
•
Can perform operations like Local setting, PTZ setting, Record and Replay etc.
Default user name of administrator: admin
Default user name of general user: user 1 \user 2
Note: user name and password are case sensitive
Upgrade
See Figure 3-46 for the interface of "Upgrade":
Click Browse button, and select correct file of upgrade (kernel file, suffix.uot), click upgrade,
then you can upgrade your system, the completion rate will be displayed during this process.
After upgrade completes, IP camera will restart automatically. Re-log in device, enter into
system settings page, check to see whether the kernel edition is the upgraded edition.
Restore
See Figure 3-47 for the interface of "Restore":
User name and password must be 1-16-character-strings
consisted by letters, numbers, underlines or dots. The characters
are case sensitive.
Figure 3-46
Don't cut off the power and internet connection while upgrading.
Honeywell
Password: admin
Password: user 1 \user 2
41