Default Zones, Interfaces, And Ports; Management Overview - ZyXEL Communications ZyWALL USG100-Plus User Manual

Figure 5 Applications: User-Aware Access Control
A
B
C
Load Balancing
Set up multiple connections to the Internet on the same port, or different ports, including cellular
interfaces. In either case, you can balance the traffic loads between them.
Figure 6 Applications: Multiple WAN Interfaces

1.2 Default Zones, Interfaces, and Ports

The default configurations for zones, interfaces, and ports are as follows. References to interfaces
may be generic rather than the specific name used in your model. For example, this guide may use
"the WAN interface" rather than "wan1" or "wan2".
Figure 7 Zones, Interfaces, and Physical Ethernet Ports
Zones
Interfaces
Physical Ports

1.3 Management Overview

You can manage the ZyWALL in the following ways.
ZyWALL USG100-PLUS User's Guide
WAN LAN1
wan1 wan2 lan1
P1 P2 P3 P4
LAN2 DMZ
lan2 dmz
P5 P6
Chapter 1 Introduction
7