Error Messages - Dell Inspiron 4100 Manual

Solving Problems: Dell Inspiron 4100
Reseat the memory modules—
the display remains blank, reseat the memory modules. See
Module."

Error Messages

HINT: If the message is not listed, see the documentation for the operating
system or the program that was running at the time the message appeared.
The file being copied is too large for the destination drive—
that you are trying to copy is too large to fit on the disk, or the disk is too
full. Try copying the file to a different disk or use a larger capacity disk.
A filename cannot contain any of the following characters: \ / : * ?
" < > |— Do not use these characters in filenames.
Insert bootable media—
nonbootable floppy disk or CD. Insert a bootable floppy disk or CD.
Non-system disk or disk error—
Remove the floppy disk and restart the computer.
Not enough memory or resources. Close some programs and try
again— You have too many programs open. Close all windows and open
the program that you want to use.
Operating system not found—
A required .DLL file was not found—
open is missing an essential file. To remove and then reinstall the program:
Windows XP
1. Click the Start button.
2. Click Control Panel.
3. Click Add or Remove Programs.
4. Click the program you want to remove.
5. Click the Change or Remove Program icon.
6. See the program documentation for installation instructions.
file:///F|/Service%20Manuals/Dell/Inspiron/4100/solving.htm (4 of 40) [2/28/2004 7:03:56 AM]
If your computer power light turns on but
The operating system is trying to boot to a
A floppy disk is in the floppy drive.
Reseat the hard drive.
The program that you are trying to
"Memory
The file