Keyboard Assembly; Removing The Keyboard - Dell Inspiron 4100 Manual

Removing and Replacing Parts: Dell Inspiron 4100
NOTICE: The connectors are keyed for correct insertion; do not force the
connections.
2. Lower the Mini PCI card toward the inner tabs to approximately a
20-degree angle.
3. Continue lowering the Mini PCI card until it snaps into the inner tabs of the
socket.
4. Attach the antenna cables to the Mini PCI card.
5. Replace the cover and tighten the two captive screws.

Keyboard Assembly

Removing the Keyboard

NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read
following procedure.
1. Remove the
2. Turn the computer over, and remove the five M2.5 x 12-mm screws labeled
"circle K."
file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (20 of 58) [2/28/2004 7:04:06 AM]
"Preparing to Work Inside the
hard drive.
Computer" before performing the