Display Assembly - Dell Inspiron 4100 Manual

Removing and Replacing Parts: Dell Inspiron 4100
6. Reinstall the five M2.5 x 12-mm screws in the holes labeled "circle K."

Display Assembly

NOTICE: You must remove the display assembly before you remove the palm
rest.
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read
following procedure.
file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (25 of 58) [2/28/2004 7:04:06 AM]
"Preparing to Work Inside the Computer" before performing the