Screw Identification - Dell Inspiron 4100 Manual

Removing and Replacing Parts: Dell Inspiron 4100

Screw Identification

When you are removing and replacing components, photocopy the placemat as a tool
to lay out and keep track of the screws. The placemat provides the number of screws
and their sizes.
NOTICE: When reinstalling a screw, you must use a screw of the correct
diameter and length. Make sure that the screw is properly aligned with its
corresponding hole, and avoid over tightening.
Hard Drive Door:
(1 each)
file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (4 of 58) [2/28/2004 7:04:06 AM]
Keyboard to
Bottom Case:
(5 each)