Dell Inspiron 4100 Manual page 109

Removing and Replacing Parts: Dell Inspiron 4100
7 right speaker/antenna assembly 15 palm rest assembly
8 fan guard
Palm Rest Inserts
1. Save and close any open files, exit any open programs, and shut down the
computer.
2. If the computer is connected (docked) to a docking device, undock it.
3. Keep the display open and tilt the computer back so that you can access the
bottom of the computer.
4. Slide and hold the latch release on the right side, and remove any device
installed in the module bay.
5. Slide and hold the latch release on the left side, and remove any battery
installed in the battery bay.
6. Locate the orange palm-rest removal buttons. Firmly press the buttons with the
eraser end of a pencil (or a dull utensil smaller than your finger) to release the
palm rests.
file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (8 of 58) [2/28/2004 7:04:06 AM]
16 keyboard