Log-In / Log-Out; Available/Unavailable - Panasonic DBS 576 Technical Manual

Section 521
Agent Features

Log-in / Log-out

Log-in procedure
Notice
Log-out procedure

Available/Unavailable

Pressing the UNAVAILABLE key from an idle terminal which is logged in
places the extension in the Unavailable status temporarily. This
UNAVAILABLE excludes the telephone from candidates of ACD incoming
50
1. Press the LOGIN key then, press the AGENT ID CODE.
2. The LED lights in green to notify completion of log-in.
3. Press ON/OFF key after the completion of log-in.
1. LOGIN key must be assigned in advance (See key Assignment).
2. Entering an unregistered agent ID code displays an error. In this
case, do the procedure from the beginning again after pressing
ON/OFF key.
3. Do not Log-in or Log-out while placing a call on hold.
If the extension is already logged in, another agent cannot log in
using his/her agent ID. The Current agent must log out once to log
in again.
4. An ACD agent Log-in cannot set CFWD or Hunt Group
functions.
1. Press the LOGIN key while the key LED is illuminated in green.
2. The key LED goes off to notify the completion of log-out.
3. Press ON/OFF key.
DBS 576 (USA) issued March 1999
Built-In ACD Supervisor Guide
576-25-521 (ACD 3.0)