Panasonic DBS 576 Technical Manual page 11

Built-In ACD Supervisor Guide
Com-
No Parameter1
mand
6 RET Program Line
Number Set-
ting 1 to 20
(max. 20
lines)
(must be set)
Operation
The following describes the operation in each of the processes.
EDIT (FF1)
This command resets the current setting of displayed program lines. Edit is
repeated from the specified program line through to the currently registered
final program line (excluding the END/DISC line).
The following screen display shows an example of selection and setting of the
SEARCH command.
SEARCH 1,020,010
03:Select Cmd.
FWD FWDVM
PLAY RET
SEARCH
List→
SEARCH 1
03:AGENT GRP.
AGENT GROUP
NUMBER
(1-3)
List→
Example:
SEARCH 2,020
03:Search Timer
AGENT SEARCH
TIME
1 to 600 sec.
List→
576-25-521 (ACD 3.0)
Parameter2 Parameter3
Count Set-
ting 1 to 255
(times)
(must be set)
1. Press soft keys (1 to 6) for the command to be set, and press the
HOLD key.
Example: Press soft key 3 to select SEARCH.
2. Set parameter 1, and press the HOLD key.
Example: Press key 2 to set group 2.
3. Set parameter 2, and press the HOLD key.
Example: Press keys 0, 1 and 5 to set the Search Timer to 15.
DBS 576 (USA) issued March 1999
Description
Return
• Repeats the program from the line number speci-
fied in parameter 1 up to this line for the count
specified in parameter 2.
Section 521
11