Adjusting The Volume; Incoming/Outgoing Call Log - Panasonic KX-HDV100 Operating Instructions Manual

Before Operating the Telephones
See "Changing the System Settings", Page 36.

Adjusting the Volume

Adjusting the Receiver Volume
1. [k]/[j] volume key: Adjust the volume during a conversation.
Adjusting the Ringer Volume or Turning the Ringer Off
[In standby mode]
1. [k]/[j] volume key: Adjust the ringer volume.
Note
R For details about setting the ringer pattern, see "Incoming Option", Page 45.
Adjusting the Ringer Volume or Turning the Ringer Off while Ringing
While receiving a call, do the following to adjust the ringer volume or turn the ringer off:
To adjust the ringer volume
1. [k]/[j] volume key: Adjust the ringer volume.
2. : Exit.
Back
*1 The adjusted volume level will also be used for subsequent calls.
To turn the ringer off
1.

Incoming/Outgoing Call Log

Displaying the Incoming Call Log
[In standby mode]
1. [F]
2. [D]/[C]: "Incoming Log" a
Note
R If "Missed Calls" is displayed on the LCD in standby mode, select "Missed Call" at step 2.
Displaying the Outgoing Call Log
[In standby mode]
1.
Call Log
2. [D]/[C]: "Outgoing Log" a
Note
R If "Missed Calls" is displayed on the LCD in standby mode, select "Missed Call" at step 2.
Making a call using the Incoming/Outgoing Call Log
See "Using the Incoming/Outgoing Call Log", Page 19.
Storing an item using the Incoming/Outgoing Call Log
See "Storing an Item Using the Incoming or Outgoing Call Log", Page 28.
14
*1
OK
OK