Table of Contents
Advertisement
system management
9.
Select a [Building-Floor].
10.
Select whether to use the Graphic Map in [Use Graphic Map]. This fi eld is an optional item, set this if required.
Use this when you assign icons for inputs on a graphic map.
11.
Select an [Icon]. This fi eld is an optional item, set this if required. Sets the icon for the input.
12.
Move to the [Output Time Setting] tab.
13.
You can set output signal's duration for each input point. For example, pressing the exit button requires
signaling the door contact of the corresponding door to open it. In general, Output 1 is set to 03 seconds of
activation when the exit button is pressed.
14.
Select an input point to be edited from the [Select Input] list, and confi gure the output time settings.
15.
Click Save <
> in the tool bar.
16.
Click Transmit button <
J
To confi rm the data transmission and its result, run the [Monitoring] > [Integrated Monitoring] from the toolbar
before clicking the transmit button. The data transmission result of each item will be displayed in the [Auditing Log]
window of the integrated monitoring screen.
INPUT POINT SETTING [SEARCH]
(This is not available in SAMS Pro Lite.)
1.
In the left [Search] tab of the main screen, select [System Management] > [Search Input Point].
88_ system management
> in the toolbar to send the confi guration to the device.
Advertisement
Table of Contents
