Table of Contents
Advertisement
6.
Select [Area].
7.
Set [Reader IN] and [Reader OUT]. If reader device is installed only for entering, set [Reader IN] only.
Set whether to use or not for each reader in [Use / Not Use] fi eld.
8.
Enter the [Reader].
9.
Select a [Reader Type].
J
For SSA-R1xxx series, select Proximity Reader. For SSA-S21xx and SSA-S30xx series products too, select Proximity
Reader since these Standalone controllers have built-in proximity readers. For SSA-R2000/2001, select Proximity
Reader+Keypad. For SSA-R2010/R2020/R2040/R2011/R2021/R2041 products, select Biometrics Reader.
10.
Click Save <
> in the tool bar.
COMPANY SETTING
As additional information for each ID registration, it is required information. All information fi elds other than the company
name are additional and optional.
The company name will be the key fi eld for the [Access Group] confi guration.
1.
From the upper menu, select [Operation Management] > [Company Setting].
2.
Enter the [Company]. You can add a logo for the company information.
3.
Click Save <
> in the tool bar.
English Englis_
English _51
Advertisement
Table of Contents
