Table of Contents
Advertisement
logging in & initial setup
SITE SETTING
This will guide you through connection between PC that has installed SMAS Pro and communication server; for
SAMS Pro Lite, you can select a site to monitor from a list of the specifi ed sites.
Up to 10 sites can be added to the SAMS Pro, and each site requires its own Communication Server.
1.
From the upper menu, select [System Management] > [Site Setting].
2.
When adding a site, use Quick Find instead of Add for editing site information, since a site has default setting
values. Click [Quick Search] on the top left corner and select the default value Default Site.
J
If a site has been newly added, Site Setting of SAMS Communication Server Pro should be done again.
With SAMS Pro Lite, you can not register a new site or delete an existing one.
3.
Edit [Site].
4.
[Communication Server IP]: Enter the IP address of the computer that is installed with SAMS Communication
Server Pro.
5.
Check the port. It is recommended to use the default 51008.
44_ logging in & initial setup
Advertisement
Table of Contents
