Table of Contents
Advertisement
Chapter 3: Setting each item function at SETUP
Pressing the MENU BUTTON of the FRONT PANEL allows users to enter SETUP MENU and see the
following menu OSD box. Setting method of each SETUP MENU function and operation is as follows.
06/01/03
SETUP
1. ADJUST
2. DATE/TIME
3. DWELL TIME
4. DISPLAY
5. TITLE
6. ALARM
7. VIEW EVENT LOG
3-1) ADJUST MENU function and setting method
•
Function: Allows adjustment to the display status
Setting method: Move to #1. ADJUST MENU by using œ œ ENTER√ √ SWITCH and press the
•
ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial
setting status.)
Move to a target item by turning œ œ ENTER√ √ SWITCH left or right.
Enter the item by pressing the œ œ ENTER√ √ SWITCH.
At this time, set a target value by turning œ œ ENTER√ √ SWITCH left or right.
You can move to another item by pressing again the SWITCH after setting the target value.
(1) CONTRAST : Adjusts light and shade of screen
(2) BRIGHT : Adjusts lightness of entire screen
(3) COLOR : Adjusts color density
(4) TINT : Adjusts color sense (Depending on the model)
(5) SHARPNESS : Adjusts contour of screen
MENU
13:14:00
MENU
06/01/03
13:14:00
ADJUST
SETTING
CONTRAST
50
BRIGHT
50
COLOR
50
SHARPNESS
50
TINT
50
English-37
Advertisement
Table of Contents
