Table of Contents
Advertisement
J
Items in the Controller Option tab are enabled or disabled depending on whether the corresponding function is
supported by the device. These optional items require confi gurations only when necessary.
Function Name
LCD Display
Output Operation Time
Unit(sec)
Whether to enable keypad
Wiegand Output
Duplicated Event Checking
User Name Display
Output Time Schedule
Mode
15.
Move to the [Biometrics Setting] tab.
Select whether to display the access control result and the card number on the monitor.
Set the output operation time interval for the controller in seconds, such as 1 sec and 0.1 sec.
For devices with built-in keypad, select whether to allow keypad use.
Select whether to output the authorization number through the Wiegand output on a successful accessing.
Select whether to detect duplicated events.
Specify whether to display accessing user's name. (Available only for LX series)
Sets the operation mode of the device's output time schedule. When selected time schedule alone, output
will be generated on scheduled time. When selected time schedule + card, output will be generated only
after the fi rst authorization from the scheduled time.
Descriptions
English Englis_
English _77
Advertisement
Table of Contents
