Table of Contents
Advertisement
system management
2.
Select an item to change using [Quick Search] in the tool bar.
3.
Available output points are listed in the [Select Output] list on the right pane of the screen.
J
Output points displayed may differ from device's type that is registered in the Device Setting.
4.
Select an output point to be edited from the [Select Output] list.
5.
Move to the [Basic Setting] tab.
6.
Enter the [Output Name].
7.
Select an [Output Type]. Select [Door Lock] when the output is connected to a door lock, [Door Alarm] for door
alarm devices, or [General] for other devices.
8.
Select the [Time Schedule]. This fi eld is an optional item, set this if required. Set the time schedule for each
output, if its function is linked to a time schedule. You can set the output to operate only for the time specifi ed in
the time schedule.
9.
Select a [Building-Floor].
10.
Select whether to use the Graphic Map in [Use Graphic Map]. This fi eld is an optional item, set this if required.
Use this when you assign icons for inputs on a graphic map.
11.
Select an [Icon]. This fi eld is an optional item, set this if required. Sets the icon for the input.
12.
Click Save <
> in the tool bar.
13.
Click Transmit button <
J
To confi rm the data transmission and its result, run the [Monitoring] > [Integrated Monitoring] from the toolbar
before clicking the transmit button. The data transmission result of each item will be displayed in the [Auditing Log]
window of the integrated monitoring screen.
90_ system management
> in the toolbar to send the confi guration to the device.
Advertisement
Table of Contents
