Table of Contents
Advertisement
access control
9.
If you want to register a photo, click [Open...] to register the photo. If you have a webcam installed with your PC,
click [Capture Photo] to capture your photo for registration.
J
You can use bmp, jpg, jpeg, gif, png and wmf fi les. Since too big image fi le may cause delay in registration and
display in monitoring screen, it is recommended to use smaller image fi le. It is recommended to use image fi les in
jpg format. It is recommended to use image fi les of less than 100KB.
10.
Move to the [Access Card Information] tab.
11.
Check [Whether to use the Card]. Check this option to recall the access privilege of the card holder if the user
does not use his/her card any more because of a return of the card.
12.
Select a [Card Type]. [Card Type] includes [Access Card], [Parking Card] and [Etc Card]. This is an option to
identify cards with each other if multiple cards are issued to one user.
13.
Type in the [Card Number].
J
You can enter the PIN number instead of the card number for the SSA-S21xx and SSA-S30xx series products.
For the SSA-S2100 and SSA-S30x0 series, you can enter the PIN number in 4~8 digits instead of the card number .
For SSA-S2101and SSA-S30x1 series, enter the PIN number in 4~8 or 10 digits.
14.
Enter the [Password]. Type in the password in 4 digits.
15.
Select a [Card Mode].
148_ access control
Advertisement
Table of Contents
