Samsung SSC17WEB User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security System
  5. SSC17WEB
  6. User manual
Samsung SSC17WEB User Manual

Samsung SSC17WEB User Manual

B/w dual quad network observation system
Hide thumbs Also See for SSC17WEB:
Table of Contents

Advertisement

Quick Links

Download this manual
B/W DUAL QUAD NETWORK
OBSERVATION SYSTEM
SSC17WEB
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Samsung SSC17WEB

Summary of Contents for Samsung SSC17WEB

  • Page 1 B/W DUAL QUAD NETWORK OBSERVATION SYSTEM SSC17WEB User Guide...
  • Page 2 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 3 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in...
  • Page 4 Item 5. Do not use attachments not recommended by Samsung as they may cause hazards. Do not use this monitor near water for example...
  • Page 5 The monitor may fall causing serious injury to a child or adult and serious damage to the appliance. Use only with a cart, stand, tripod. bracket or table recommended by Samsung or sold with the monitor. Any mounting of the monitor should follow Samsung’s instructions and should use a mounting accessory recommended by Samsung.
  • Page 6 For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges. Do not overload wall outlets and extension cords as this can result in a risk of fire of electric shock.
  • Page 7 When replacement parts are required be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire electric shock or other hazards. Upon completion of any service or repairs to this monitor ask the service technician to preform safety checks to determine that the monitor is in proper operating condition.
  • Page 8 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 9 The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

  • Page 10: Table Of Contents

    Contents IMPORTANT SAFETY INSTRUCTIONS ......Eng-2 IMPORTANT SAFEGUARDS ..........Eng-4 FCC & ICES Information ............Eng-7 Chapter 1: System Components and Installation 1-1) Environmental requirements for installation and safety ...Eng-12 1-2) System Components............Eng-13 1-3) CAMERA composition and installation method ..Eng-14 1-4) CAMERA Composition and Connecting Method to MONITOR ..............Eng-18 1-5) External terminal connecting method for CAMERA and MONITOR ..............Eng-19...

  • Page 11: Table Of Contents

    3-3) DISPLAY MENU function setting ......Eng-27 3-4) TITLE MENU Function setting ........Eng-28 3-5) ALARM MENU Function setting.........Eng-29 3-6) NETWORK SETUP function and setting method ..Eng-30 3-7) SSC17WEB basic setting ..........Eng-38 3-7-1) "LIVE" MENU ............Eng-40 3-7-2) System Configuration Menu ........Eng-55 3-7-3) Network Configuration Menu.........Eng-63 3-7-4) Monitor Set up............Eng-72...
  • Page 12 This section describes the environmental requirements for safe installation and use. Install the product on a flat table or in a rack. It should be used only when level and should not be used when stood vertically or obliquely. The location in which the main system is installed and the configuration of the wiring room are very important for proper operation of the system.
  • Page 13 POWER CODE & SENSOR INSTALLATION MANUAL CAMERA CABLE CONNECTOR CAMERA BRACKET ITEM MODEL DESCRIPTION Q’ty NOTE MONITOR SSC17WEB 17" CRT MONITOR STANDARD CAMERA SSC-12C NORMAL TYPE CAMERA CAMERA BRACKET SBR-110 STAND TYPE BRACKET Tapping Screw 3 CAMERA CABLE MCB-60 6PIN SHIELD CABLE 60ft(1ft=0.3048m)
  • Page 14 SC-12 PIN NUMBER SPEC SPEAKER(HOT) VIDEO_OUT SPEAKER(COLD) AUDIO_OUT/ALARM_OUT 12V DC It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor.
  • Page 15 It outputs the sound signal which was transferred from the monitor. SC-12 SSC-12C s camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-110). Choose an installation site that can sufficiently support the weight of the equipments to be installed. Attach the camera mount bracket to the wall or ceiling using the supplied three screws (M4 X L15).
  • Page 16 SC-12 CAMERA MOUNT BRACKET (SBR-110) is used to attach the camera to a wall, ceiling or shelf. Explains the installation of CAMERA MOUNT BRACKET as wall as the installation of the camera onto the CAMERA MOUNT BRACKET. • Choose an installation site that can sufficiently support the weight of the equipments to be installed.
  • Page 17 • Loosen the handle by turning it in a counter clockwise direction and then adjust the camera position . Tighten the handle, turning it clockwise, and lock the camera in position. • Connect the camera cable to the camera. Handle Indoor Wall or Ceiling 57 (W) X 47.2(H) X 100.5(L)
  • Page 18 After positioning monitor and installing four cameras to a desired location, please connect CAMERA to MONITOR through CAMERA CABLE (MCB-60) as shown in the below figure. Please check whether or not it is properly connected. • Turn on the monitor after connecting cameras, and check if camera image is displayed. The initial screen mode of monitor is quad mode.

  • Page 19: Audio

    An additional PIR sensor or external sensor can also be connected. The additional PIR sensor can be connected as shown in the above graphic. Sensor’s trigger signal is NO (Normal Open). Sensor is not supplied. (Sold separately) VIDEO OUT BNC1 ~ BNC4 terminals in the rear of the monitor are VIDEO terminals for outputting video images from OBSERVATION CAMERA to THROUGH OUT.
  • Page 20 f) Not Used g) Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR. h) Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR. i) Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR. j) Connect the G (ground) terminal on the rear panel to the Ground terminal of the VCR.

  • Page 21: H-Hold

    Chapter 2: MONITOR FRONT PANEL KEY Function and Using Method Front Panel 2-1) AUDIO: Adjust volume control for proper sound level. 2-2) H-HOLD: Adjusts the horizontal stability of the screen. If the screen collapses in the horizontal direction, adjust this button. 2-3) V-HOLD: Adjusts the vertical stability of the screen.
  • Page 22 2-7) VCR/MENU/ZOOM - KEY Allows users to switch LIVE MODE to VCR MODE or VCR MODE to LIVE MODE. If VCR MODE is cancelled, the QUAD picture of LIVE MODE will be automatically displayed. In case any event happens at VCR MODE such as LOSS or ALARM, the MODE will be automatically switched to LIVE MODE, and the pre-set operation for the event will be carried out.
  • Page 23 2-9) SEQ / PIP - KEY SEQUENCE MODE It makes a picture switch sequentially. This means that display the picture will be displayed during the DWELL TIME pre-set at the DWELL MENU of SETUP MENU, and switch the picture automatically as a pre-set sequence.

  • Page 24: Rear Power S/W

    2-12) POWER SAVE - KEY Allows users to set POWER SAVE MODE of monitor. PICTURE screen is off when the POWER SAVE KEY is pressed, and the ON/OFF status of the monitor can be judged through LED ON/OFF status. Users can exit from POWER SAVE MODE by pressing POWER SAVE BUTTON again under picture "OFF"...
  • Page 25 Chapter 3: Setting each item function at SETUP MENU Pressing the MENU BUTTON of the FRONT PANEL allows users to enter SETUP MENU and see the following menu OSD box. Setting method of each SETUP MENU function and operation is as follows. 06/01/03 13:14:00 SETUP...

  • Page 26: Date/Time Menu Function Setting

    3-1) DATE/TIME MENU Function setting Function: Sets the display date format and current time. Setting method: Move to #1. DATE/TIME MENU by pressing KEY at setup menu, then press the KEY to display the OSD as shown in the below figure. (The figure shows the initial setting status.) 06/01/03 13:14:00...

  • Page 27: Display Menu Function Setting

    If the time is set for each camera channel by pressing KEY, each camera picture will be displayed for the set time and switched to the next picture automatically. 3-3) DISPLAY MENU function setting Function: Allows users to select the color and ON/OFF of borderline at QUAD DISPLAY. Setting method: Move to #3.

  • Page 28: Title Menu Function Setting

    3-4) TITLE MENU Function setting Function: Set the title of each camera at your discretion. Setting method: Move to #4. TITLE MENU by pressing KEY at SETUP MENU, and press the KEY to display the OSD as shown in the figure below. (The figure shows the initial setting status.) 06/01/03 13:14:00...

  • Page 29: Alarm Menu Function Setting

    3-5) ALARM MENU Function setting Function: Allows users to set the ALARM MODE for each camera. Setting method: Move to #5. ALARM MENU by pressing KEY at SETUP MENU and press the KEY to display the OSD as shown in the figure below. (The figure shows the initial setting status.) 06/01/03 13:14:00...
  • Page 30 - Constituted by Static IP on the TCP/IP network 1) Move to "STATIC..." by using at NETWORK ACCESS, then press to set STATIC... (STATIC : Select in case the network configuration of SSC17WEB is fixed IP (Public or Private IP) 06/01/03 13:14:00 STATIC ACCESS ADDR 192.168.1.200...
  • Page 31 However, if the IP Router is used in a network environment, input proper values with reference to the IP Router manual. If the SSC17WEB is using a Router, you may also connect remotely by typing In the WAN IP Address of the Router and the HTTP port assigned to the SSC17WEB.
  • Page 32 DHCP. In case of a configuration using DHCP, as the connection to SSC17WEB is made using domain names (EX : http://sff0000.websamsung.net) that are automatically registered in our DDNS server, IP address, Subnet Mask and Gateway that are in the network tab of Admin Mode are not necessarily to be inputted.
  • Page 33 On completion of setting to DHCP setup, the screen, [D] is displayed. If the network connection is cancelled or cut, [D] starts blinking. 6) You can view the video source of the SSC17WEB from a remote location PC. 7) Make sure the remote PC meets the minimum specification requirements described in chapters 1 and 2, and make sure that the PC is internet capable and set up to be able to browse the internet.
  • Page 34 Where ff0000 is the MAC address of your SSC17WEB in this example. If your SSC17WEB’s MAC address is ff0001, then type in ff0001 instead of ff0000 Locate the MAC Address of the SSC17WEB (each SSC17WEB has its own unique MAC address) It can be checked in ‘6.NETWORK SETUP”...
  • Page 35 ADSL User (PPPoE) - Constituted by IP on PPPoE (ADSL) SSC17WEB products can be used on the network using IP through PPPoE (ADSL). In case of a user (EX : ADSL user) who needs ID and password of the communica- tions that he subscribes for in case of internet connection, the configurations using PPPoE would be available.
  • Page 36 ADSL Service Provider. In case of using ADSL (ISP-internet service provider, you must type correct User Name and Password by ISP to connect to SSC17WEB. If you type incorrect User Name or Password, you can not see the image transferred from SSC17WEB.
  • Page 37 10) You can view the video source of the SSC17WEB from a remote location PC. 11) Make sure the remote PC meets the minimum specification requirements described in chapters 1 and 2, and make sure that the PC is internet capable and set up to able to browse the internet.
  • Page 38 Modem’s power ON. Since the connection would not be available, as IP is not received from ADSL commu- nications, please reboot by turning off the power of ADSL Modem and SSC17WEB for more than 5 seconds and then try to connect again.
  • Page 39 6) When you enter properly, a window appears as shown below. Eng-39...
  • Page 40 Initial display mode of monitor if QUAD A. KEY Type Function Choose a camera by channel Ch 1 ~ Ch 8 CHANNEL NEXT SINGLE MODE (1ch Default selected) 320 X 240 Size 720 X 480 QUAD MODE (QUAD Default selected) SEQUENCE MODE SAVE CAPTURE...
  • Page 41 PLAY STOP LIVE MODE change ADMIN MODE change In case users want to see the camera image at full mode, Select a target camera by turning camera select key. After that it’ selected camera image will be displayed at full screen. AT SINGLE DISPLAY Original Size Large Size...
  • Page 42 Pressing on the SEQUENCE KEY on the front allow to automatically switch to SIN- GLE MODE Full screen or QUAD MODE. If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds and the SEQUENCY KEY is pressed at this time, the operation will be carried out as follows. (NO signal channel will be skipped while single screen is auto-switching) * SINGLE MODE SEQUENCE DISPLAY ->...
  • Page 43 “Server Name” is the name of your SSC17WEB you have given during setup of the SSC17WEB. If you have connected to and recorded from more than one SSC17WEB on the same PC, there will be more than one “Server Name” directory.
  • Page 44 When you select on a play key and press the Open button or double click the file, that file will play back on the Remote Viewer as a motion clip. When the file has finished playing or when you press the Stop button, the Remote Viewer will go back to Live screen.
  • Page 45 - Player installation/execution/deletion - Installation Player will be installed together when it is connected to SSC17WEB. - Execution (Follow the instruction to execute it separately.) Click Start Program —> SSC WEB Control —> Player. (Fig. 3-!) - Deletion Click Start —> Program —> SSC WEB Control —> Uninstall. (Fig. 3-@)
  • Page 46 - Program screen configuration - How to play 1. Play - back File - Open... Selecting this, you can choose one between fjp and jpg on a window as shown below. Eng-46...
  • Page 47 Having chosen and opened a file, you will see a picture as shown below. Reverse playback Enlarge Playback Reduce Pause Original size Stop Partial storing(AVI support) To the back frame Save the present frame as a JPEG image To the front frame Print Status Speed control...
  • Page 48 - Partial recording - Snap shot - Print - Partial Recording Partial recording is to separate a section from the file selected and played and save it as a form of AVI. Select in the toolbar and a window will appear as shown below. Start time and End time of the file will be displayed and the user can decide the section.
  • Page 49 And press ‘Save’. Then press ‘Record’ button and the picture below shows that it was completed. Frame control function of Dialogue box is to con- trol the number of frames of AVI files. Although the original file has been recorded at a speed of 10 frames per second, 30 frames or 3-second frames of the original file will be stored and become a “second in an AVI file if you set the number of AVI file frames to 30 frames.
  • Page 50 It is a function to save the present image as a form of a jpeg file. Select in the toolbar. The result will be as follows. Type in the file name and press ‘Save’ to store it as a jpeg file. It is a function to print the present image.
  • Page 51 Type in the phrase you added in ‘Description’. Then press the ‘OK’ button. Select Print and press ‘OK’. Eng-51...
  • Page 52 It is an administrator’s menu to set the general items on SSC17WEB Server. To use this menu, you need the administrator’s ID and Password. On delivery, they are “root” (administrator’s ID) / “root” (administrator’s Password). The password can be changed on Admin Menu.

  • Page 53: Monitor Set Up

    Enter key to execute the Admin Menu as shown below. 4) Screen configuration ! : General menus of Admin Menu. The menus related to SSC17WEB Server are divided into System, Network, Monitor Setup, and Utilities in the main. Each of them has several sub menus.
  • Page 54 • System Configuration System Information Admin. Password Access Limitation User Registration Video Alarm Notification Network Configuration Network Configuration PPPoE (ADSL) Network Ports View Network Status Network Status Notification DDNS Configuration Monitor Setup Date & Time View Event Log Display Dwell Time Title Alarm Utilities...
  • Page 55 In this menu, you can check the information on the system including the name of the SSC17WEB Server, its model name and the version of the model and change the name of the SSC17WEB Server. Server Name Type in the name of the SSC17WEB Server.
  • Page 56 After clicking the apply button, the new password will be applied. Then the connection of SSC17WEB Server, which was connected by using the existing password, to the Web Page will be cut off because the new password is now applied.
  • Page 57 This menu is to set the targets the SSC17WEB Server can have an access to. Access Limitation This is to limit the maximum frame speed when the Configuration users, who are registered in the system, join and see the images.
  • Page 58 This is a user control menu to register, change, or delete the users who can use the SSC17WEB Server. Eng-58...
  • Page 59 User ID Decide the ID of the person you want to register. Password Decide the password of the person you want to register. Confirm Type again the password of the person you want to register. Password Full Name Type in the name of the person you want to register. This is a menu to register a user.
  • Page 60 This is to set the data to be added in the video data and set an environment for each channel. Image Size This is to choose the size of the image of video data. You can choose between 2 kinds of size (Small / large). Image Quality This is to choose the quality of the image.
  • Page 61 Choose if you want to log in the SMTP of the ISP providing Login SSC17WEB with services. User ID ID for the SMTP server of the ISP that provides SSC17WEB with services. Password Password for the SMTP server of the ISP that provides SSC17WEB with services.
  • Page 62 EX) When user who has an e-mail address (SSC17WEB@yahoo.com) and password(123456) in YAHOO sets “Alarm Notification” in order to send a mail to test1@yahoo.com... After completing setting, click Apply button. If you click the back button, initial values are typed in all fields.
  • Page 63 On this menu, you can fix the general environment related to the network of the SSC17WEB Server and check the present status of it. Network Configuration Set “Static IP” or “DHCP”. PPPoE(ADSL) Set PPPoE (ADSL). Network Ports Set “Network Port”.
  • Page 64 1) If the of the SSC17WEB Server is Static : Choose “Static IP”. 2) Type in the IP Address you want to assign to the SSC17WEB Server, NetMask, GateWay, DNS1, and DNS2 addresses. 1) If the IP of the SSC17WEB Server is DHCP : Choose “DHCP Client”.
  • Page 65 Where ff0000 is the MAC address of your SSC17WEB in this example. If your SSC17WEB’s MAC address is ff0001, then type in ff0001 instead of f0000. At this time, you should add “s” in front of “mac address”. Locate the MAC Address of the SSC17WEB (each SSC17WEB has its own unique MAC address).
  • Page 66 5) DNS (Domain Name Service) : Service to convert a Domain Name (ex. www.yahoo.com) into an IP address (ex. 216.109.127.28). The SSC17WEB Server uses this service to join the FTP server or other webs by the Domain Name. ADSL service supports only PPPoE (Point to Point over the Ethernet).
  • Page 67 Client PC. The present SSC17WEB Server uses HTTP Port (80). 1) This is the port the Client PC uses to connect to the web page of the SSC17WEB Server. Depending on the environment of the network, its value can be varied.
  • Page 68 The existing setting will be recalled if you press Reload button. When there is a change in the setting status of the SSC17WEB Server, it sends e-mails to the people who want it. Set Mail Notification to “Enable” to send the network setting status of the SSC17WEB Server to the specified e-mail addresses in the cases as follows.
  • Page 69 1) DHCP Client has been set in “Network Configuration” menu and an IP has been assigned from the actual DHCP Server to make communication possible. 2) PPP Client has been set in “PPPoE” menu and communication has become possible through the connection with ISP or PPP Server. Mail Notification E-mail forwarding or not.
  • Page 70 Choose to use the Mail Notification function or not. Choose “Enable” if you want to notify the network status of the SSC17WEB Server to the people who want through e-mails. Type the address of the SMTP Server. Set “Authentication Login” to Enable and type in the ID and password assigned from the SMTP server.
  • Page 71 Note The domain name of this system is sff0000.websamsung.net In case of a configuration using DHCP, as the connection to SSC17WEB is made using domain names (EX : http://sff0000.websamsung.net) that are automatically registered in our DDNS server, IP address, Subnet Mask and Gateway that are in the network tab of Admin Mode are not necessarily to be inputted.
  • Page 72 Please refer to the CHAPTER3 of the user’s manual. Set the display data format and current time. Display the time and data of camera event and type of event Displays each picture for pre-set time and automatically Switches it to the next picture at SEQUENTIAL DISPLAY MODE. Allows users to select the color and ON/OFF of borderline at QUAD DISPLAY Set the title of each camera at your discretion...
  • Page 73 Save Configuration is required to save all of new config- uration in the system. Otherwise, no new configuration will be saved effective. Reboot System reboot is highly and strongly recommended to applied all new configurations properly to the SSC17WEB system System Update System Update Eng-73...
  • Page 74 This menu is to save all of the present setting in the Flash Memory. If you changed any of the setting for the SSC17WEB, it is recommended that you save it in the Flash Memory in this menu. Eng-74...
  • Page 75 This menu is for the rebooting of the system. It is better to reboot the system if you change the setting and update the flash. 1. Click “Reboot” in the utilities group. 2. Click “Reboot!!!”. Eng-75...
  • Page 76 This menu is to update the inner programs and data of the SSC17WEB Server. They are recorded in the Flash Memory and composed of 4 parts called Kernel Image, Ram disk Image, System Image, and Web Image respectively. Each image file should be stored in the user’s PC for update.
  • Page 77 When you click the start button located in the right side of “All (Kernel, RAM disk, System, Web) Update”, a window will appear to ask if you want to update. Click “Cancel” to stop updating. 1. “OK” to proceed updating. 2.
  • Page 78 3. Click “Next” button to move to the next stage. Click “Skip” button to move to the next stage without Kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. Eng-78...
  • Page 79 Click “Previous button to go back to the previous stage. Click the next button to execute update of the program and move to the next stage. Click the cancel button to stop the update process. 4. In the next stage, a pop-up window will appear for the file searching for the RAM Disk Update.
  • Page 80 5. Click “Next” button to move to the next stage. Click “Skip” button to move to the next stage without Kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. Click “Previous”...
  • Page 81 6. In the next stage, a pop-up window will appear for the file searching process for the System Image Update. Choose “Fw_2pq.tar.gz” in the browse. 7. Click “Next” button to move to the next stage. Eng-81...
  • Page 82 Click “Skip” button to move to the next stage without kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. Click “Previous” button to go back to the previous stage. Click the next button to execute update of the program and move to the next stage.
  • Page 83 9. Click “Next” button to move to the next stage. Click “Skip button to move to the next stage without Kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. Click “Previous”...
  • Page 84 10. A window will appear for rebooting after completing all the update processes. Click the reboot button and press the confirmation button to reboot the system. 11. Close your web browser and wait for about a minute before you log in again Files relate to the update of SSC17WEB Kernel Image zimage RAM Disk Image rfs.gz...

  • Page 85: View Event Log Menu Function And Setting Method

    3-8) VIEW EVENT LOG MENU function and setting method > Function: Displays the time and date of camera event and type of event. > Setting method:Move to #7. VIEW EVENT LOG MENU by using at SETUP MENU, then press the KEY to display the OSD as shown in the figure below.
  • Page 86 Initial display mode of monitor is QUAD A. In case users want to see the camera image at full mode, select a target camera by turning œ œ , √ √ KEY left and right. After that, press the KEY and selected camera image will be displayed at full screen. If users turn the œ...
  • Page 87 Users can switch SINGLE DISPLAY MODE and SEQUENTIAL DISPLAY MODE to QUAD DISPLAY MODE, or QUAD A (QUAD B) to QUAD B (QUAD A), or PIP MODE to QUAD MODE, press the QUAD/PAGE KEY. * At QUAD MODE display from SINGLE MODE or SEQUENCE MODE, 06/01/03 13:14:00 06/01/03...
  • Page 88 Pressing on the SEQUENCE KEY on the front allows screen to automatically switch to SINGLE MODE full screen or QUAD MODE. (‘no-signal’ channels will be skipped while single screen is auto-switching.) If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds and the SEQUENCE KEY is pressed at this time, the operation will be carried out as follows.

  • Page 89: Single Screen Display

    Can be used to see PIP screen in Single screen mode. If you press the œ œ , √ √ KEY on PIP screen ,the main screen will change. If you press the œ œ , √ √ KEY to the left and right, the main screen can be transferred to another channel. Sub-screen location can be selected on DISPLAY MENU in SETUP MENU.

  • Page 90: Zoom Mode Display

    4-5) ZOOM MODE DISPLAY When users want to see zoomed image of a specific area of the display, press the ZOOM KEY in the front to display zoom selection area. Select zoom target area by turning KEY left and right, and press the KEY, then, the selected area will be displayed at full single mode with zoomed area doubled.
  • Page 91 SC-12 Model Name SSC-1 2 C Broadcasting System EIA STANDARD 1/3" B/W IT CCD Imaging Device 510(H) x 492(V) Effective Pixels S Internal Synchronization H :380 TV Lines, V: 350 TV Lines Resolution VBS 1.0Vp-p(75ohms composite) Signal Output S/N Ratio 48 dB 2lux(F2.0, 50 IRE) Minimum Scene Illumination...
  • Page 92 Video Input CAMERA 8 Input: 1.0Vp-p(CVBS), 75. (vertical) VCR 1 Input (to Video Out of VCR) : 1.0Vp-p, 75. (vertical) BNC 4 Output: 1.0 Vp-p, 75. (vertical), S-Jack Type, CVBS Video Output VCR 1 Output: 1.0 Vp-p, 75. (vertical), S-Jack Type, CVBS Audio Input CAMERA 8 Input: VCR 1 Input (to Audio Out of VCR) : S-Jack Type...
  • Page 93  32bit Embedded Processor Hardware  Flash Memory : 8Mbytes  SDRAM : 32Mbytes  HTTP, TCP/IP, FTP, Telnet, ARP, PPP, Network Protocols DHCP, PPPoE  Compression Algorithm : Real-time M-JPEG Image Compression & Quality  Rate : 30 fps for each channel ...
  • Page 94 If the administrator setting and monitoring may not be available due to conflicting unregistered MAC addresses, please contact a local service center or head office. SSC17WEB enables users to see up to four viewers on one computer. The system may malfunction if over five viewers with low performance computers are connect- ed to the device.
  • Page 95 The initial screen of Samsung Electronics’ web site is as follows. 1. http://www.securitysamsung.com http://www.samsung.com/Products/CCTV.htm 2. Network Security in Homepage 3. Download the following items from SSC17WEB. ! Owner’s manual - SSC17WEB Owner’s manual @ UP-GRADE S/W - kernel, RAM disk, System, Web...
  • Page 96 List of Routers compatible with SSC17WEB. Refer to Router User’s Manual for the detailed router setup. Other routers may be incompatible with SSC17WEB. Eng-96...
  • Page 97 Eng-97...
  • Page 98 (such as a PC and a SSC17WEB or several SSC17WEB); you must use an IP Router (different from a simple Network Hub); you must set up the Router to work with the SSC17WEB;...
  • Page 99 Linksys model WRT54G 1. Click the “Application and Gaming” tab. 2. Click “Port Range Forward”. 3. Port forwarding Row #1 : ! Application : Set this to “HTTP” @ Start and End : Set both to “From 10000 to 65535” # Protocol : Select “TCP”...
  • Page 100 2. Click the WAN and LAN Port information. Write down the WAN Port IP Subnet Mask number and the LAN Port IP Address number. You will need it later when setting up the SSC17WEB. 3. Click “Advanced” and “Port Forwarding”...
  • Page 101 D-Link model DI-624+ 1. Select “Virtual Server” and “Advanced” You need to create Virtual Servers (Port Forwarding) for HTTP, TCP and Upgrade separately. 2. Virtual Server (Port Forwarding) for HTTP ! Enabled : Leave this “checked” @ Name : Set this to “HTTP” # Private IP : SETUP MENU ->...
  • Page 102 SMC model 7004VBR 1. Select “NAT” and “Virtual Server” You need to create Virtual Servers (Port Forwarding) for HTTP 2. Virtual Server (Port Forwarding) for HTTP : use the first empty ID row. ! IP Address : SETUP MENU -> 7. NETWORK SETUP -> Check IP from network status to apply it identically to Private IP after DHCP setup.
  • Page 103 Samsung CCTV dba GVI 2801 Trade Center Drive. Suite 120 Carrollton, TX 75007 Part No.: 1 4 0 2 1 - 1 3 2 5 Toll Free : 888-595-2288 Printed in Korea...

Table of Contents