Load & Show - Rancilio CLASSE 10 USB S Original Instructions Manual

Hide thumbs Also See for CLASSE 10 USB S:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 66
W23
Interr. EV cold 4-TEA
W24
EV hot 4-TEA shorted
W25
Interr. EV hot 4-TEA
W26
EV steam iSteam shorted
W27
Interr. EV steam iSteam
W30
EV air iSteam shorted
W31
Interr. EV air iSteam
W32
Check the message file
W33
Check USB
10. LOAD & SHOW
Inserting a USB key into port 20 (fig. 3) will automatically upload the LOAD & SHOW interface, through which
it is possible to perform the following operations:
1. Machine software:
2. Graphics:
3. Messages:
4. Parameters:
Note:
 The files that need to be uploaded must be copied directly onto the USB key, without first putting them into
a folder.
 Never switch the machine off during the upload procedure.
** Features of the logos that can be
uploaded
Static logo
Up to 4 static logos can be displayed on the Class
10.
In order to be uploaded into the machine system, the
logos must have the following features:
- bitmap image (.bmp)
- 240x64 pixel resolution
- 2-colour image (1 bit)
software updating procedures.
uploading of any static or dynamic customisation logos**.
updating of the machine messages (provides new language
upload options).
enables uploading of another machine's parameters or downloading
parameters - currently in use on Class 10.
Dynamic logo
One animated logo can be displayed on the Class
10.
In order to be uploaded into the machine system, said
logo must have the following features:
- bitmap image (.bmp)
- Max. 1280x64 pixel resolution
- 2-colour image (1 bit)
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents