Set Mode Items - Icom IC-M87 Instruction Manual

8
SET MODE

■ Set mode items

D Beep tone function "bP"
You can select silent operation by turning OFF the beep
tones, or you can have 2 types of confirmation beeps sound
at the push of a switch. When ON is selected, a fixed beep
(Pi) sounds and when US is selected, the preset beeps (e.g.
do, re, mi) sound.
Beep tone ON (default)
D Priority scan function "Pr"
The transceiver has 2 scan types—Normal and Priority
scans. Normal scan searches all TAG channels in the se-
lected channel group. Priority scan searches all TAG chan-
nels in sequence while monitoring Channel 16.
Normal scan (default)
18 18
PUSH
User Beep
PUSH
Priority scan
D Scan resume timer "St"
The Scan resume timer can be set as a pause (OFF) or timer
scan (ON).
• OFF : When a signal is detected on a channel, scan pauses
on the channel until the signal disappears, and then
resumes.
• ON : When a signal is detected on a channel, scan pauses
on the channel for 5 seconds, and then resumes.
PUSH
Scan resume timer OFF
(default)
D Auto scan function "AS"
The Auto scan function automatically starts the scan when
no signal is received, or no operation is performed for 30 sec-
onds.
PUSH
Auto scan OFF (default)
Scan resume timer ON
Auto scan ON