Intrinsic Safety - Icom IC-M87 Instruction Manual

INTRINSIC SAFETY

Versions of the IC-M87 which display the "EX"
marking on the serial number seal.
The approval rating for these models is II 2G Ex
ib II A T3 Gb.
WARNING! NEVER
the transceiver) in an explosive atmosphere. The optional bat-
tery chargers are not approved as Intrinsically Safe.
When the transceiver is used in a hazardous area, the
MUST
BP-227AX
MUST
138 be attached to the speaker-microphone connec-
tor.
KEEP
the transceiver and the BP-227AX clean to avoid any
risk of ignition due to the build-up of electrostatic charges.
Repair of Icom transceivers should only be carried out by
authorized Icom distributors. In particular, repair of ATEX ap-
proved transceivers can
tain the intrinsically safe rating.
ATEX approved transceivers. Only Icom has the repair exper-
tise and procedures to maintain the ATEX approval. Contact
your Icom distributor or authorised dealer for details.
v
charge the BP-227AX (with/without
be attached, either the jack cover or HM-
ONLY
be done by Icom to main-
NEVER
attempt to repair an
The ATEX standard is described on the sticker (Ex Marking)
and BP-227AX as below.
• DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE
MAY BE PRESENT.
• DO NOT CHARGE THE BATTERY IN HAZARDOUS
LOCATION.
The equipment can be used without the microphone but
with the jack cover.
2G Ex b A T3 Gb
BP-227AX