Advertisement
2004-2007 MITSUBISHI ENDEAVOR
1
Disconnect the negative battery terminal
to prevent an accidental short circuit.
2
Unsnap and remove entire panel sur-
rounding radio and A/C controls.
(Figure A)
3
Remove (1) 10MM nut from the rear support
on the top left of radio on cross bar behind
dash. (FIGURE B)
4
Remove (3) Phillips screws to remove
factory radio chassis (Figure C)
Remove (4) Phillips screws from the pock-
5
et at the bottom of the radio and A/C panel
and remove the pocket. (This is where the
99-7009 will be mounted.) (Figure D)
99-7009
A
B
C
D
1
Advertisement
