Counting - Sartorius mc1 Installation And Operating Instructions Manual

Counting

A weight readout is stored as a reference sample quantity (factory setting: 10 pcs). To change this value, see the description on
page 30.
(The reference sample quantity is displayed as long as the reference sample weight has not yet been stored for counting.) While
counting (piece count readout), you can press
accuracy (approx. double the reference sample quantity). In the process, the reference weight is recalculated based on the total
reference sample weight and the piece count displayed.
Counting Small Parts
Additional menu codes used in the example:
Function
With data ID code
Ref. quantity + ref. wt.
Application: counting bulk quantities of items with the same weight
Step/(key lD)/key
Place Container on the pan
,
Add 10 sample parts Store:
STO REF
Fill Container with desired
quantity
Toggle to weight readout:
press
STO
To Update ref. sample, add
more parts
(approx. 2x nRef)
press: OPT
The data ID Codes
nRef +
wRef +
Qnt +
N +
identified by - OPT - to Update the reference sample for optimising the
Code
7 2 2
7 1 2
Readout
+ 20.09905 g
0.00000 g
+ 0.20019 g
+ 10 pcs
+ 3784 pcs
+ 3784 pcs
+ 75.75190 g
+ 75.75190 g
1.0 %
+ 20 pcs
+ 0.020014 g
mean
10 pcs reference sample quantity (piece count)
0.020019 g reference weight
3784 pcs calculated piece count
75.75190 g net weight
As an alternative, you can select
this output parameter:
Reference weight
Data output/printout
nRef + 10 pcs
wRef + 0.020019 g
Qnt + 3784 pcs
N + 75.75190 g
Lim + 1.0 %
wRef + 0.020014 g
Code 2 1 4
7 1 3
19