Operating In Destination Search Mode - Navigon 7110 User Manual

User's manual NAVIGON 7100 | 7110
Entire Route: Zooms the map so that the entire route is visible.
Current Position: Selects the map section shown so that the current
location is centred.
9.5.1

Operating in Destination search mode

1. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap the
Buttons with various functions will appear.
Take Me There: Begins navigation to the selected point. If you are currently
navigating, navigation will be aborted.
Interim Destination: Sets the selected point as an interim destination. The
navigation system will first guide you to this interim destination.
Afterwards, you may simply continue navigation to your original
destination.
This function is only active during navigation.
Set as Destination: Adds the selected point as the last point in the route plan. If
no route plan was open, the selected point will become the first point in
a new route plan.
Save: Opens the S
under which the selected point will be stored in the F
For more detailed information, please refer to chapter "Saving a
destination" on page 29.
Search Nearby: Opens the POI N
destinations near the specified point. (See "Special destinations nearby"
on page 22)
Tap the
►
Destination search mode. You will be returned to the window from
which you started this mode.
- 42 -
(OK) buttton.
D
AVE ESTINATION AS
EARBY
(Destination search) button to quit the
... window. You can enter a name
window. Here you can search for
list.
AVOURITES
Working with the map