Managing Routes; Saving Routes; Loading Routes; Navigation - Navigon 7110 User Manual

User's manual NAVIGON 7100 | 7110
7.2

Managing routes

You can save each planned route under a particular name.
Note: Only the start point and route points will be saved, not, however,
the calculated route. If you load a route that has been saved, it must be
recalculated before navigation can begin.
You can load, rename or delete stored routes.
7.2.1

Saving routes

The R
point and at least one route point.
1. Tap on Options > Save Route.
2. Enter a name for the route.
3. Tap the Save button.
The destination is now saved to the S
window closes.
7.2.2

Loading routes

1. Tap on Options > Saved Routes.
2. Tap the route that you want to load.
3. Tap the Load Route button.
The R
route points of the loaded route have been entered.
7.3

Navigation

The route must be calculated first. You may then begin navigation or
just simulate it.
7.3.1

Calculating and displaying routes

It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The R
one route point have been entered.
1. Tap the Show Route button.
The map window opens in Preview mode.
The starting point and the route points are marked by flags. For
each stage, the distance and the estimated trip time is given. This
data is also displayed for the entire route.
- 32 -
P window is open. You have entered the starting
OUTE LANNING
P
OUTE LANNING
P window is open. The starting point and at least
OUTE LANNING
AVED
window opens. The starting point and the
R list. The dialog
OUTES
Routes with stages