Table of Contents
Advertisement
Operating in Destination Search mode
1. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the cross hairs.
2. Tap
Buttons with various functions appear.
Detailed address information for the selected destination displays in the upper left-
hand corner. Tap
Take Me There
Interim Destination
Set as Destination
Save
Search Nearby
• Tap
returned to the window from which you started this mode.
• Tap
you are prompted to confirm your decision to quit navigation.
September 2008
(
).
OK
for more information about the POI.
Begins navigation to the selected point. If you are currently
navigating, navigation stops.
Sets the selected point as an interim destination. The navi-
gation system first guides you to this interim destination.
Afterwards, you can continue navigation to your original
destination.
This function is only active during navigation.
Sets the selected point as the destination.
Opens the
name for the selected point to be stored in the
list.
Opens the
destinations near the specified point. (See "POIs nearby" on
page 42.)
(
Destination search
(
Back
) to return to the
NAVIGON 2000S | 2200T Series User's Guide
NAVIGON, INC.
S
D
...
AVE
ESTINATION AS
. Here you can search for
POI N
EARBY WINDOW
) to quit the
Destination Search mode
M
. If you are currently navigating,
AIN WINDOW
Maps
Destination Search mode
. You can enter a
WINDOW
F
AVORITES
. You are
83
Advertisement
Table of Contents
