Working With The Map; Maps; Map In Preview Mode - Navigon 7110 User Manual

User's manual NAVIGON 7100 | 7110
Rename: Opens a window in which you can change the name for the selected
destination or route.
Traffic: Opens the T
listed. For detailed information, please refer to chapter "TMC (Traffic
Information)" on page 45.
Show Turn-by-Turn List: Shows detailed directions for the route, including all
points at which you must turn.
For more detailed information, please refer to chapter "Turn-by-Turn
List" on page 43.
Factory Settings: Opens a window in which you can reset all settings to the
original factory settings.
Delete Destination: Deletes the highlighted destination from the list (L
D
ESTINATIONS
deletion.
Save Destination: Saves the specified address in the F
For more detailed information, please refer to chapter "Saving a
destination" on page 29.
Add to Route: Opens route planning. The address specified will be added as the
first route point of a new route.
For more detailed information, please refer to chapter "Routes with
stages" on page 30.
9

Working with the map

9.1

Maps

Even if you have stored several navigation maps on the navigation
system's memory card, NAVIGON 7100 | 7110 can only operate with
one map at a time.
Tap on Options > Settings > Current Map to see which map is currently
being used. You can also select another map here.
9.2

Map in Preview mode

You have entered a destination and tapped the Start Navigation button.
- OR –
You have planned or loaded a route and tapped the Show Route
button.
The map opens in Preview mode. The entire route is visible.
- 36 -
I
RAFFIC NFORMATION
or F ). A dialog window prompts you to confirm
AVOURITES
window in which pending reports are
AVOURITES
AST
list.
Working with the map