Tmc (Traffic Information); Displaying Traffic Messages; Tmc Settings - Navigon 7110 User Manual

10.3

TMC (Traffic Information)

The integrated TMC receiver enables the navigation system to make
use of current traffic messaging. If necessary, it can change your route
dynamically in order to avoid a traffic jam, for example.
10.3.1

Displaying traffic messages

The traffic reports that are currently valid are available via the options of
several windows.
1. Tap on Options > Traffic.
The T
Above the list, the Traffic information button shows the type of traffic
messaging listed and how many messages of this type are listed.
2. Tap the Traffic information button to select the messages to be
displayed.
For each traffic message in the list, information about the location and
type of traffic obstruction will be displayed.
Tap a message to display detailed information.
►
The navigation system can Avoid (
on the route. The Avoid / Ignore button shows the corresponding status.
Tap the button to select the alternative setting.
►
Tap the
►
window.
10.3.2

TMC Settings

In the T
►
Settings.
In the TMC S
sender, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
Tuning Mode
Tap the Tuning Mode button to determine the settings for the station
you have chosen to receive traffic information.
Automatically: Use the arrow buttons in the station section to tune
►
into another station. The system will search for another station if
reception becomes poor.
Hold station: Use the arrow buttons in the station section to tune
►
into another station. The system will search for the same station on
a different frequency if the signal becomes poor.
Useful functions
I
RAFFIC NFORMATION
(Back) button to close the T
I
RAFFIC NFORMATION
window, you can set and configure the TMC-
ETTINGS
User's manual NAVIGON 7100 | 7110
window opens.
) or Ignore (
window, tap on Options > TMC
) obstructions
I
RAFFIC NFORMATION
- 45 -