Configuring Navigon 7100 | 7110 - Navigon 7110 User Manual

11

Configuring NAVIGON 7100 | 7110

The S
to suit your personal requirements.
The settings can be reached via the options of several windows.
Tap on Options > Settings.
►
The S
Current Map, POI, Basic Settings and Route Profile.
Tap a button to open the corresponding settings window.
►
The settings of the individual windows are distributed on several
windows. You can toggle between these windows with the
Some settings can only accept two or three different values. These
settings can be recognised by the
values are visible. The value that is currently valid is highlighted in
black.
Tap the
►
values.
Some settings can accept several different values. These settings can
be recognised by the
is visible.
1. Tap the
A list with all potential values opens. The value that is currently valid
is marked.
2. Tap the desired value. It is now marked.
3. Tap the OK button.
The list closes again. The new value will be displayed.
For each setting there is a
see a precise explanation of the corresponding setting.
Configuring NAVIGON 7100 | 7110
window is where you can adapt NAVIGON 7100 | 7110
ETTINGS
window has several buttons:
ETTINGS
(To the Left) and
(Toggle) button to alternate between the potential
(List) button.
User's manual NAVIGON 7100 | 7110
(To the Right) buttons.
(Toggle) button. All potential
(List) button. The value that is currently valid
(Help) button. When you tap it, you will
- 47 -