User's manual NAVIGON 7100 | 7110
Note: If Bluetooth is activated on the mobile phone, the connection can
also be established during a call. (See chapter "Connecting to a mobile
phone" on page 50)
12.6.5
Entering numbers
You can enter numbers during a call. This may be the case, for
example, if a further connection via a telephone system is necessary.
1. In the C
The appearance of the button changes. The keyboard opens.
2. Enter the desired numbers.
3. Tap on
12.6.6
Bringing the navigation software to the foreground
You can bring the navigation software to the foreground at any time. In
this way, you can bring the map to the foreground during a call when
you are navigating with NAVIGON 7100 | 7110.
Tap on
►
The navigation software is now in the foreground. The C
P
ROGRESS
connection exists at present. It also displays, if known, the
interlocutor's telephone number.
You have the following options:
Tap on
►
or off again.
Tap on
►
In the navigation software, tap on
►
bring the hands-free module to the foreground.
12.6.7
Ending the call
In the C
►
end the call.
The B
- 54 -
P
ALL IN
ROGRESS
(Keypad) again to close the keyboard.
> Navigation.
bar at the top of the display indicates that a telephone
or
(Hang up) to end the call.
P
ALL IN
ROGRESS
HF P
LUETOOTH
HONE
window, tap on
(Mute) to switch the microphone on
window, tap on
window opens.
(Keypad).
ALL IN
(Handsfree Module) to
(Hang up) to
Handsfree Module