Table of Contents
Advertisement
User's manual NAVIGON 7100 | 7110
3
Operating the navigation software
3.1
Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
You have started navigation. The map is open in Navigation or
Destination search mode.
1. Tap the
The volume bar opens. It contains three buttons for adjusting the
volume:
2. Tap the
The volume bar closes.
3.2
Information
Symbols located at the top of the screen are used to display
information.
GPS
The GPS symbol can show the following GPS-reception status:
No GPS: The built-in GPS receiver is not operational. Contact customer
service if the problem persists.
No Signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready: Data is being received from at least three satellites.
Position can be calculated.
For more detailed information regarding GPS status, please refer to
chapter "GPS status" on page 43.
Energy
The Energy symbol can display the following conditions of the built-in
battery:
- 14 -
(Volume
)
(Louder
,
)
(Volume
)
button.
(Quieter
,
)
button again.
Operating the navigation software
(Volume on/off
.
)
Advertisement
Table of Contents
