Table of Contents
Advertisement
User's manual NAVIGON 7100 | 7110
Starting navigation
Tap the Start Navigation button or simply start driving.
►
No GPS reception
If the received GPS signal is insufficient, the following message will
appear:
"GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
Wait until GPS reception is sufficient for determining position, the
►
route will be recalculated and you can begin navigation.
Tap the Cancel button. The M
►
saved to the L
8
Options
Some windows offer options that lead to further functions.
Tap the Options button to open the options list.
►
Tap the option you would like to execute.
►
If you would like to quit the options list without selecting an option,
►
tap the Options button again.
Delete All: Deletes all destinations from the L
then empty. A dialog window prompts you to confirm deletion.
Save as Favourite: Saves the specified destination to the F
For more detailed information, please refer to chapter "Saving a
destination" on page 29.
Show on Map: Shows the specified address on the map.
Settings: Opens the S
system.
For more detailed information, please refer to chapter "Configuring
NAVIGON 7100 | 7110" on page 46.
Logbook: Opens the .L
recording.
For detailed information, please refer to chapter "Logbook" on page 46.
Saved Routes: Opens a dialog window in which you can load a stored route.
GPS status: Opens the GPS
regarding GPS reception. You can also save data regarding the current
location.
- 34 -
D
AST
ESTINATIONS
window. Here you can configure the navigation
ETTINGS
window. Here you can begin and end logbook
OGBOOK
window. Here you can see details
STATUS
opens. The destination is
AIN WINDOW
list.
D
AST
ESTINATIONS
AVOURITES
list. The list is
list.
Options
Advertisement
Table of Contents
