Operating In Destination Search Mode - Navigon 7100 User Manual

Working With Maps
Map in Destination Search Mode

Operating in Destination search mode

1. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the cross hairs.
2. Tap
Buttons with various functions appear.
Take Me There
Interim Destination
Set as Destination
Save
For more detailed information, see "Saving a Destination" on page 35.
Search Nearby
• Tap
to the window from which you started this mode.
• Tap
you are prompted to confirm navigation cancellation.
54
(OK).
Begins navigation to the selected point. If you are currently
navigating, navigation stops.
Sets the selected point as an interim destination. The nav-
igation system first guides you to this interim destination.
Afterwards, you can continue navigation to your original
destination.
This function is only active during navigation.
Adds the selected point as the last point in the route plan.
If no route plan was open, the selected point becomes the
first point in a new route plan.
Opens the S
a name under which the selected point is stored in the
F
AVORITES
Opens the POI N
destinations near the specified point. (See "POIs nearby"
on page 26.)
(Destination search) to quit the Destination search mode. You return
(Back) to return to the M
NAVIGON 7100 User's Guide
NAVIGON, INC.
D ...
AVE ESTINATION AS
list.
. Here you can search for
EARBY WINDOW
W . If you are currently navigating,
AIN INDOW
. You can enter
WINDOW
September 2007
Revision 1.1