Operating In Destination Search Mode - Navigon 40 essential User Manual

User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live
Entire Route: Zooms the map so that the entire route is visible.
Current Position: Selects the section of map displayed so that the
current location is at the centre.
7.6.1

Operating in Destination search mode

1. Tap on the point to which you want to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap on
Buttons with various functions will be displayed.
Take Me There: Starts navigation to the selected point. If you are currently
navigating, this route navigation will be cancelled.
MyReport: Opens the M
any changes to traffic monitoring systems and routing.
Interim Destination: Sets the selected point as interim destination. The
navigation system will first guide you to this interim destination.
Afterwards you can continue navigation to your original destination.
This function is only active during navigation.
Add to Route: Adds the selected point to the route planning as the last point.
Navigation will then continue to this point after you have reached the
original destination or the other route points.
Save: Opens the S
which the selected point will be saved in the F
"Saving destinations" on page 42.)
Search Nearby: Opens the POI N
destinations near the selected point. (Refer to "POI nearby" on
page 32.)
Tap on
►
You will be returned to the window from which you started this
mode.
Working with the map
(OK).
R window. Here you can notify NAVIGON about
Y EPORT
D
AVE ESTINATION AS
EARBY
(Back) in order to quit Destination search mode.
window. You can enter a name under
AVOURITES
window. Here you can search for
list. (Refer to
- 67 -