Operating In Destination Search Mode - Navigon 7100 User Manual

Zoom Out: The map section shown becomes larger, but you will see
fewer details.
Zoom In: The map section becomes smaller, but you will see more
details.
Zoom Mode: When this button is active, you can plot a map section with
the pen or with your finger.
Plot the map section from upper left to bottom right and it will then zoom
to fit the size of the screen.
Plot the map section from bottom right to top left, and the map will zoom
out.
Pan Mode: When this button is active, you can move the map section
with the pen or with your finger. Simply push the map in the desired
direction.
Entire Route: Zooms the map so that the entire route is visible.
Current Position: Selects the map section shown so that the current
location is centred.
9.5.1

Operating in Destination search mode

1. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap the
Buttons with various functions will appear.
Take Me There: Begins navigation to the selected point. If you are currently
navigating, navigation will be aborted.
Interim Destination: Sets the selected point as an interim destination. The
navigation system will first guide you to this interim destination.
Afterwards, you may simply continue navigation to your original
destination.
Working with the map
(OK) buttton.
User's manual NAVIGON 7100 | 7110
- 45 -